Product Overview
The 12V PTC Fan Heater is secure to use with insulator on surface. It adopts excessive temperature wire as main wire, long lasting and properly performance. With mounting holes, it's effortless to line up and has lengthy provider lifestyles over three years. A PTC fan heater is capable to warmness each solids and gases, very convenient. Applicable for air conditioner units, air curtain machine, drying machine, dryer, heater, cars.
Product Name |
PTC fan heater |
Heat material |
PTC Thermistor |
Heat methods |
Heat radiation by air flow |
Lead wire |
Silicone high temperature line |
Applications |
Air conditioning units / Electric Heater / Car / Equipment / General electric appliance / Air curtain machine / Humidifier |
Product Features
· Very low air resistance
· Long service life
· No Thermostat Required
· Virtually unlimited life
· No moving parts to wear
· Very low cost
· No electrical noise
· The higher the temperature, the more electricity efficient
· Does not burn when in contact with paper, matches or clothes
Product Specifications
· Extra-high-heating-efficiency Fin Pitch: 1.2mm, 1.68mm
· Extra-low-air resistance Fin Pitch: 2.0mm, 2.6mm
· Includes Safety Fuse
· Voltage : AC/DC 120V, 240V, 48V, 24V, 12V, 3V
· Power : 50~2000W
· Safety : UL
· Patents : US, Germany, France, Britain, Taiwan, China
Product Name |
PTC fan heater |
Heat material |
PTC Thermistor |
Heat methods |
Heat radiation by air flow |
Extra-high-heating-efficiency Fin Pitch |
1.2mm, 1.68mm |
Extra-low-air resistance Fin Pitch |
2.0mm, 2.6mm |
Voltage |
AC/DC 120V, 240V, 48V, 24V, 12V, 3V |
Power |
12W,50W,100W,150W~2000W |
Compliance |
UL, CSA, CE, REACH, RoHS |
Patents |
US, Germany, France, Britain, Taiwan, China |
PTC Fan Heater Models
Models |
Dimension (mm) |
Fin Width (mm) |
Fin Pitch (mm) |
Photo |
MH |
26mm x 90mm x L |
90 |
1.2, 2.6, 2.0 |
|
MSH |
26mm x 65mm x L |
65 |
2.6, 1.68 |
|
SH |
26mm x 65mm x L |
65 |
1.68 |
|
TH |
26mm x 45mm x L |
45 |
2.0 |
|
OH |
26mm x 30mm x L |
30 |
1.68 |
|
SS |
148 x 44.5 x 15mm / 148 x 22.5 x 15mm 120 x 107 x 15mm / 96 x 88.5 x 15mm 96 x 22.5 x 15mm / 25 x 22.5 x 15mm 45 x 44.5 x 15mm |
N/A |
N/A |
Applications
1. DC can be used on automobile or for warm air, dehumidifying, temperature increasing, temperature maintenance etc. where DC power is supplied.
2. AC can be used for general house electronic appliances for hand drying, dress drying, coverlet drying, shoes drying, bowl drying, humidifying, dehumidifying, air condition, ironing, electronic spoon etc.
PTC Heater Accessories
Full Assembly available for Full Clad PTC Air Heater to help reduce design time and prevent stock up of accessories during pilot run. Complete PTC heater assembly includes: PPS plastic mounting frame set, a fan, a heat-proof shield, terminal wire set and a fuse.
You can save your budgets on new housings by using our PTC Heater Fan Housings together with our PTC heater fans.
â— High temperature resistance PPS frames
â— Specially designed for MH and SS type heaters
â— Helps to save budget on new housing
â— Can be used together with standard fans
Full Assembly Examples of Models MSH and MH Type
Characteristics
1. The PTC heating component is installed with safety protection device. When it is used abnormally, current will automatically cut off to maintain safety.
2. The heating components are integrated together, consist of average heating effect. When used for heaters, it can independently control single PTC (500W, 800W) double PTC (1000W,1500W) or triple PTC(1500W,2000W) heating components, effectively saves electricity cost and increases product life.
3. The pole and terminal are connected by point welding, preventing electrode loosen causing resistant and temperature to increase when heated, cold contraction or heat inflation.
4. The outer edge of the PTC heating component is designed with single and double insulation. When in contact with metal will not cause electric shock or short circuit.
5. The heating component is airtight/ tightly sealed, electrode is unexposed. Most suitable for application in bathroom or high humidity locations.
6. It is installed with double insulation heating device, can be used underwater, without causing electricity leakage or short circuit. When heated dry, it will not crack or burn down the container.
7. No smell, no radiation and will not oxidize or cause oxygen shortage when used for a long time.
8. Fast thermal respond time, low inrush current. Will not cause fire sparks or flame by instant/sudden power supply or when in contact with flammable objects such as matches, cotton, paper.
9. Temperature control devices are not required for various temperature selections. Static heating, lowers product cost and saves electricity effectively.
10. The heating component not only can be used in heater fans, its individual components can also be used for general house ware electricity appliances
11. Either AC/DC can be applied to meet customers' requirements, special specification can be developed according to customers' need.
http://www.ptc-heaters.com/