Original
By certification 
HITACHI SX14Q001-ZZA 5.7 inch QVGA Display SX14Q001-ZZA CSTN LCD SX14Q001-ZZA
1.General Data of HITACHI SX14Q001-ZZA
| Display Brand | HITACHI / KOE | Display Model | SX14Q001-ZZA |
| Display Size | 5.7 INCH | Display Type | CSTN-LCD, LCM |
| Pixel Format | 320(RGB)×240 [QVGA] | Configuration | RGB Vertical Stripe |
| Active Area(mm) | 115.2(H)×86.4(V) mm | Outline(mm) | 167(H)×109(V) ×11.6(D) mm |
| Bezel Area(mm) | 122.0(H)×92.0(V) mm | Treatment | - |
| Luminance | 110 cd/m² (Typ.) | Contrast Ratio | 40:1 (Typ.) (TM) |
| Viewing Angle | 40 (Typ.)(CR≥2, Φ2-Φ1) | Response | 250/200 (Typ.)(Tr/Td) |
| View Direction | 6 o'clock | Operating Mode | STN, Normally Black, Transmissive |
| Lamp Type | CCFL [1 pcs] , W/O Driver | Used for | Industrial Application |
| Signal Type | 16 pins Parallel Data (8-bit) , FPC | Touchscreen | Embeded (4-wire Resistive) |
2.HITACHI KOE 5.7inch SX14Q001-ZZA Definition of Zone
3.Hot Screen Model in HITACHI KOE 5.7 inch Industrial LCD Panel
| Screen Model |
Resolution | Brightness | Backlight |
Interface |
C/R |
| SX14Q004 | 320x240 | 200 | CCFL | Parallel Data | 40:1 |
| TX14D11VM1CBA | 320x240 | 350 | CCFL | TTL | 350:1 |
| SP14Q002-A1 | 320x240 | 140 | CCFL | Parallel Data | 25:1 |
| SP14Q005 | 320x240 | 220 | CCFL | Parallel Data | 25:1 |
| SP14Q006 | 320x240 | 150 | WLED | Parallel Data | 25:1 |
| TX14D12VM1CBA | 320x240 | 350 | CCFL | TTL | 350:1 |
| TX14D16VM1CBC | 320x240 | 400 | WLED | TTL | 350:1 |
| SX14Q001-ZZA | 320x240 | 110 | CCFL | Parallel Data | 40:1 |
| SX14Q002-ZZA | 320x240 | - | CCFL | Parallel Data | - |
4.Operation Precaution
(1) A slight dew depositing on terminals may cause electrochemical reaction which
leads to terminal open circuit. Please operate the LCD module under the relative
condition of 40℃ 85%RH.
(2) Resistance range : Your controller shall be set up to allow the resistance range of
touch panel specified in our CAS.
(3) Pointed position of touch panel may shift owing to a change in resistance of
touch panel depending on the operation condition . To compensate this shift, the
set shall be given a calibration function.
5.Photos of KOE LCM SX14Q001
